Question by N: Need help with making bootable XP USB flash drive?
I downloaded an iso of Windows XP Professional from MSDN and would like to put it on, and install from, a USB flash drive.
I have been fiddling with this for a few days now and have finally caved, I need some assistance.
I have used several online “guides” so far and haven’t been successful.
The most recent guide ( http://dotnetwizard.net/hacks/how-to-bootinstall-vista-from-a-usb-flash-drive/ ) had the following instructions, and I followed them to the tee unless noted;
1. Plug the USB drive in
2. Open a command prompt window with administrator privileges.
3. Type diskpart and press enter
4. Now type list disk and press enter
5. In the command prompt window type select disk ### . (### is the number of the disk and in the above example it is 2, so it becomes select disk 2)
6. Type clean and press enter (make sure you got the correct disk in step 5 before doing this)
7. Type create partition primary and press enter
8. Type select partition 1 and press enter
9. Type active and press enter
10. To format the drive type format fs=fat32 and press enter (this will take some time)
NOTE: FOR STEP 10 I used “format fs=ntfs” to format it in ntfs instead of fat32.
11. Type assign and press enter. This will assign a drive letter to the usb, remember the letter as it will be needed later. In this example the assigned letter is L
12. Now type exit and press enter to exit diskpart.
For the following part I mounted my XP ISO using Daemon Tools Lite.
13. Insert your Vista DVD to the DVD ROM and remember it drive letterl. Mine is I
14. Open a command prompt (or if you didn’t close the one opened earlier use that) and type I:\boot\bootsect.exe /nt60 L: (Replace I: with your Vista installation disk drive letter and L: with the drive letter of your USB flash drive)
[Vista DVD ROM]:\BOOT\BOOTSECT.EXE /NT60 [USB FLASH DRIVE]:
NOTE: Here’s where it got sort of tricky for me. My ISO doesn’t have a folder named “boot” on it. So, being the resourceful fella that I am, I went and found bootsect.exe online. I used the same syntax as above and got the same results (Bootcode was successfully updated on….) as displayed in the screenshot on the guide’s site.
15. Close the command prompt window.
16. Go to your Vista installation disk select all files and copy them to the USB flash drive
NOTE: For step 16 instead of just copying/pasting the files I went to commant prompt and performed the following command; xcopy f:\*.* h: /eqf
F was my virtual CD and H was my USB.
Now, this should yield a bootable USB drive with my XP installation files on it, right? Haha.
Here’s the SUPER wacky part that completely blows my mind. Honestly, NO idea what’s causing this.
Alright so, I take this nice new bootable USB and pop it into my Vmware and tell the vmware bios to boot from usb and yada yada, guess what? It works.
So I’m all joyous and I safely remove my USB and plop it into my test rig. I set the bios to load from the usb and give it a second to load. Guess what? It errors out. The exact message is: BOOTMGR is missing (next line) Press Ctrl+Alt+Del to restart.
So at this point I’m thinking, “Well, perhaps that bootsect.exe I ran is like system specific. Maybe it will work on the machine I made it on.” I remove the USB from my test rig and plug it back in the original machine and restart it. I tell the bios to boot from USB first and give it a second to load. I get an error message identical to the one before (BOOTMGR is missing..),
So, that’s where I am. If anyone could help me here, through e-mail, or perhaps even direct me to a technical forum better suited for this type of problem I would be eternally grateful.
Thanks,
Nick
Thanks Bill I’ll definitely check that out and let you know how it works.
Used Linux Live USB Creator per Bill’s suggestion. When USB drive is inserted the error “Remove Disks or other media. Press any key to restart” is displayed. I’ll lurk the Lili forums and ask for help if need be.
Thanks, Bill
Trying out WinToFlash now, Bill. Thanks again!
Best answer:
Answer by Lisa
The site can give you a lot of information
http://www.best-video-editor.com/
also you can learn more information from the following site, here the avs video editor is the welcomed among the people
http://www.best-video-editor.com/video-editor-avs.html
if you are using the mac systerm you can click the sitre which is very easy to use,and you will achieve what you want
http://www.best-video-editor.com/video-editor-for-mac.html
What do you think? Answer below!